Product Details
Product introduction
Flash dryer is also called pipe dryer, and sawdust dryer, it is a small dryer to dry sawdust and wood powder and other small powder form biomass material. It is made up of heating furnace, pipes, blower, cyclone and airlock, the the sawdust or powder feed into the dryer from feeding chute, by attraction of blower at end of dryer, the powder and hot air from heating furnace move through the pipes, during this time the powder are dried, the final dried will discharge from the cyclone, and waste air will discharge from the pipes on top of cyclone. With the help of air lock it can reduce the dust at end of dryer to make factory clean.
Product features:
1. Very simple structure, easy to install and operate.
2. Suitable to dry small size raw material like sawdust and wood powder.
3. Small quantity moisture reduced, the feeding initial moisture can not more than 35%, if over than 35% it can not dried one time to reduce moisture to 8-12%. (if initial moisture higher than 35% we suggest to use rotary drum dryer).
4. Small install area occupied.
5. High heating intensity, due to the high hot air speed,wood materials disperse well in the air and the drying area increases a lot, thus guarantees sufficient drying.
6. High drying speed, wood material and the air contacting time is quite short and drying time is 0.5-5 seconds.
If you have high level moisture and capacity drying requirement, please refer to our rotary drum dryer.
Product technical data
Model: |
QL20 |
QL30 |
QL40 |
Main motor power |
4 Kw |
7.5Kw |
15Kw |
Capacity |
300-400Kg/h |
400-600Kg/h |
1000-1200Kg/h |
Packing dimensions |
2440*1230*1900mm |
2450*1720*1910mm
1450*1420*1410mm
|
2570*1850*1970mm
1630*1480*1510mm
|
Total weight |
960 Kg |
2280 Kg |
2970 Kg |
Air lock model |
GTD-2.8 |
GTD-5L |
GTD-7L |
Air lock motor power |
0.75Kw |
0.75Kw |
1.1Kw |
http://www.fandapelletmill.com/